Bandsaw Outfeed Table

Here is a look at my bandsaw out-feed table. The Leg vise is now completed and I even got the entire front face of the bench  joined and coated with the first coat of finish. Still a few details left but they should not be a problem to get done over the weekend. Unfortunately I […]

Some of a Bench!

The top is finally attached to the base of the work bench. According to the math this bench is apparently 431 pounds of Hard Maple. While there are only 107 bd feet of material in the completed piece, Roughly 23 bd ft have been lost to the jointer, planer and hand planes. An additional 20 […]