Today I sanded all of the components for both the walnut and mesquite hall tables to 400 p. I also spent a good amount of time shaping the through tenons and bottoms of the table legs to match the radius edge on the rest of the components. I use compressed air to blow all of […]
Archive for February 2011
Arizona Hall Table Part 4
February 27, 2011Arizona Hall Tables Part 3
February 23, 2011On the third day of working on the hall tables I fine tuned the fit of each and every mortise and tenon joint and completed all of the major work on the table base. The leg tapers were laid out and cut on the band saw. I start out by drawing the taper on the […]
Correa Wood Works 