Walnut Bed part 4: Resin and Grooving

With the main joinery completed, I need to make a groove to accept the floating walnut panels. The groove must be centered on the legs, rails and stiles, all of which have different thicknesses. The groove in the posts and stiles is fairly straight forward and completed using a 1/2″ two flue straight cutter on […]

Walnut Bed part 3.2; completed joinery

The joinery for the main components on the walnut bed have been completed. After tediously hand cutting the tenons for the vertical stiles I have fitted them all to the main horizontal rails. It is somewhat gratifying to see the joinery come together for the first time. The next task will cutting a groove to […]